Product 04 · Print & addressing

Inkjet Address & Print Add-On

HP-based print heads added to an existing line for read-and-print addressing, serialization, barcodes and variable data.

Ask about this system All product lines

Row of HP-based inkjet print heads on an MJR mounting rail.

What it does

Printing added where the product already travels.

The print module mounts to equipment you already run. Two proven placements: addressing directly on book covers, paired with MJR camera matching for read-and-print in a single pass; and printing on tabs or labels inside the unwinder section of a tabber, before the tab is applied to the product.

01
HP-based print heads
Proven, serviceable cartridge technology, mounted and integrated by MJR.
02
Serialization, barcodes, variable data
Sequential numbering, scannable codes and per-piece variable content.
03
Read and print in one pass
Paired with MJR camera matching, the barcode read drives what gets printed on the cover.
04
Prints before application
On a tabber, printing happens in the unwinder section — the tab or label is imaged before it is applied to the product.

See the Kirk Rudy 535CS tabber case study

Print hardware

Heads, rails, engines and controllers.

jet.iM2 UV print heads printing on a web.

Two jet.iM2 print heads integrated on a mailing line.

UC22 integrated thermal inkjet system printing on a case.

PC22 controller with dual bulk ink docks.

iSP multi-head thermal inkjet print bars.

Video

MJR print systems in production.

Bulk ink sorting Vertical Inkjet Printing with Bulk Ink Supply on a Sorting System.

Solvent inkjet on a Sitma wrapper MJR Vision solvent inkjet on a Sitma wrapper — printing on the film before wrapping, on the wrapped piece after wrapping, and record-based bundle break.

UV curable inkjet MJR UV Curable Inkjet System — jet.iM2 print head, up to 600 dpi, line speeds up to 1200 fpm (speed varies with resolution and ink).

Wood bow marking Wood bow marking — proximity sensors measure the distance to the wood as it travels lengthwise. Where the distance is too short (a bow), the area is marked with inkjet, and a sensor later reads the mark to cut away the bowed section.

Next step

Send us the make and model of your line.

We will tell you what can be retrofitted, what it takes, and how fast. Parts lead time runs from immediate to about two weeks; once parts are on hand, installs are typically completed in one day.

Call 888.824.8606 Request a review