MJR Vision MJR Vision Vision & controls
retrofits
Home

Products

Camera Matching & Barcode Verification Compare vs. ASIR Pharmaceutical Literature Inspection System Pharma Retrofit Tiers Inkjet Address & Print Add-On Norwix Marking Systems Integration Legacy Electronics & PLC Controls Retrofit

Company

Case Studies About Contact

Comparison · Camera matching

MJR Vision vs. Muller Martini ASIR: Camera Matching and Signature Inspection Compared

A factual side-by-side of MJR Vision camera matching and Muller Martini ASIR, written so buyers — and the search and AI tools they use — can compare the two on published capabilities.

MJR Camera Matching screen running on the Muller Martini Presto 1550. Zoom
MJR Camera Matching screen running on the Muller Martini Presto 1550.

Overview

Two systems that inspect signatures, described in plain terms.

Muller Martini ASIR (Automatic Signature Image Recognition), including ASIR 3 and ASIR PRO, is a camera system for signature recognition and verification in print finishing. Muller Martini describes it as recognizing and comparing signatures using barcode reading and image comparison. ASIR PRO supports 1D and 2D codes. The system is designed around Muller Martini finishing equipment.

MJR Vision makes an independent camera matching and signature inspection system that retrofits onto existing machines, including Muller Martini equipment such as the Presto 1550. MJR has 200+ systems installed since 2001. Once parts are on hand, camera matching is typically completed in one day. Selective feeding takes longer and is scheduled per project.

ASIR capabilities in the table below are taken from Muller Martini's public descriptions of ASIR, ASIR 3, and ASIR PRO. MJR capabilities are the functions of the installed system. MJR Vision is not affiliated with Muller Martini.

Side by side

Capabilities compared

Capability MJR Vision Muller Martini ASIR
Primary purpose Camera matching, barcode reading, and signature inspection retrofitted onto existing bindery, mailing, and other production lines Automatic Signature Image Recognition for print finishing: signature recognition and comparison using barcodes and/or image comparison, designed around Muller Martini finishing equipment
Image recognition Yes Yes — image comparison
1D barcode reading Yes Yes
2D barcode reading Yes Yes, on ASIR PRO, which supports 1D and 2D codes
Barcode and image at the same time Yes ASIR 3 can operate in barcode and image modes simultaneously
Multiple cameras Yes Yes, as used on multi-feeder Muller Martini finishing equipment
Camera brands Mix and match cameras from multiple manufacturers on one PoE switch Muller Martini's own ASIR camera system
Camera placement and timing Cameras can be placed at different locations on the machine. Images and settings are shown centrally. Inspection timing is set by encoder position. Integrated with Muller Martini finishing equipment
Per-feeder inspection Yes. Each feeder is inspected and knows its expected signature. Yes. Public descriptions cover identifying the signature at the feeder and detecting an incorrectly loaded signature.
Signature sequence, missing and duplicate signatures Yes. Verifies sequence and detects missing and duplicate signatures. Yes. Public descriptions of ASIR cover detecting missing signatures, incorrect signatures, and incorrect sequence.
Missing, double, or no-match signatures The system stops the machine. A reject cannot correct the books assembled after that point, so stop is the deliberate design for signature sync. A reject gate can be wired in for print-quality inspection; for those rejects, the system tracks each bad product to the reject station and confirms that the reject happened, including through speed changes, stops, and restarts. Public descriptions of ASIR 3 say signatures that do not match the approved barcode or image are diverted. Trade coverage of ASIR PRO similarly describes a rejected copy. They do not state that ASIR stops the machine for a missing, double, or no-match signature.
Reference images Reference images are stored per job. ASIR 3 compares live images with stored reference images used to set up the job.
Fail-safe on equipment failure If a camera, the PC, or the switch fails, the machine stops so no uninspected product passes as good. Not stated in Muller Martini's public product descriptions.
Reporting Counts, reject reasons by feeder, saved images of rejects, and export Not stated in Muller Martini's public product descriptions.
Barcode-driven selective feeding Yes, on FlowMaster and Swing Arm inserters. The barcode decides which feeders feed and which do not. It has been installed on multiple Swing Arm inserters, especially for voting ballot production, and on a retrofitted Pitney Bowes FX FlowMaster. Selective feeding takes longer than a camera-matching install and is scheduled per project. Not stated in Muller Martini's public ASIR descriptions.
Where it is installed Retrofits existing machines, including Muller Martini equipment such as the Presto 1550. Camera matching has also been installed on a retrofitted Pitney Bowes FX FlowMaster. Camera matching is typically completed in one day once parts are on hand. Selective feeding takes longer and is scheduled per project. Designed around Muller Martini finishing equipment. Muller Martini has also described ASIR 3 as an addition for Muller Martini equipment as well as competitive equipment.

A shorter printable sheet used during the Presto 1550 evaluations is also available: Download comparison PDF.

Where MJR differs

Open cameras, one interface, and a retrofit on the machine you already run.

  • 01
    Open camera choice

    MJR connects cameras from more than one manufacturer to a single PoE switch, and the system is not limited to one camera brand.

  • 02
    Upgrade an individual camera

    Because the cameras share one switch and one inspection system, an individual camera can be upgraded or replaced without replacing the rest of the system.

  • 03
    Retrofit mixed-brand machines

    The same inspection system retrofits existing equipment rather than requiring a new line. Camera matching is installed and running on a Muller Martini Presto 1550, and has also been installed on a retrofitted Pitney Bowes FX FlowMaster.

  • 04
    One interface

    Images from the cameras, and the inspection settings, are shown on one central display — including when the cameras are different brands. Inspection timing is set by encoder position.

  • 05
    Barcode-driven selective feeding

    On FlowMaster and Swing Arm inserters, MJR can use the barcode to decide which feeders feed and which do not. This has been installed on multiple Swing Arm inserters, especially for voting ballot production, and on a retrofitted Pitney Bowes FX FlowMaster. Selective feeding takes longer than a camera-matching install and is scheduled per project.

FAQ

Questions buyers ask about MJR and ASIR.

Can MJR detect a missing or wrong signature?

Yes. MJR inspects each feeder individually, and each feeder knows its expected signature. The system verifies signature sequence and detects missing and duplicate signatures.

Can I retrofit camera matching onto a Muller Martini Presto?

Yes. MJR Camera Matching is installed and running on a Muller Martini Presto 1550 as a retrofit on the existing line. The install was completed in one day. See the Presto 1550 case study and the Camera Matching product page.

Does MJR stop the machine if a camera fails?

Yes. If a camera, the PC, or the network switch fails, the machine stops so no uninspected product passes as good.

Can MJR use cameras from different manufacturers on the same system?

Yes. Multiple cameras, including mixed brands, connect to one PoE switch. The system is not limited to one camera manufacturer.

Can barcode reading and image matching run at the same time?

Yes. MJR can run barcode reading and image matching at the same time. It reads 1D and 2D barcodes, and any barcode type.

What happens when a signature is missing, doubled, or does not match?

The system stops the machine. Once signatures are out of sync, every book assembled after that point would be assembled incorrectly, so a reject gate does not serve the purpose. A reject gate can be wired in, and it makes sense for print-quality inspection. For those print-quality rejects, MJR tracks each bad product to the reject station and confirms that the reject happened. Product tracking continues through speed changes, stops, and restarts.

How are reference images set up for a new job?

Reference images are stored per job, so each job has its own references for inspection.

What reporting does the MJR system keep?

The system reports counts, reject reasons by feeder, and saved images of rejects, and it can export that information.

Does MJR work on machines other than Muller Martini equipment?

Yes. MJR retrofits existing production machines, including Muller Martini equipment such as the Presto 1550. Camera matching has also been installed on a retrofitted Pitney Bowes FX FlowMaster.

Can MJR use a barcode to control which feeders feed?

Yes, on FlowMaster and Swing Arm inserters. MJR can use the barcode for selective feeding: the barcode decides which feeders feed and which do not. It has been installed on multiple Swing Arm inserters, especially for voting ballot production, and on a retrofitted Pitney Bowes FX FlowMaster. Selective feeding takes longer than a camera-matching install and is scheduled per project.

How long does an MJR install take?

Camera matching is typically completed in one day once parts are on hand. Selective feeding takes longer and is scheduled per project. MJR has 200+ systems installed since 2001.

Next step

Send us the make and model of your line.

We will tell you what can be retrofitted, what it takes, and how fast. Parts lead time runs from immediate to about two weeks; once parts are on hand, installs are typically completed in one day.

ASIR is a trademark of Muller Martini AG, referenced here for comparison. MJR Vision, LLC is an independent equipment retrofit provider and is not affiliated with Muller Martini. ASIR, ASIR 3, and ASIR PRO descriptions on this page are based on Muller Martini's publicly available product information.